- - SFP+ transceiver module 100% compatible with Cisco’s equivalent module
- - Provides 10 Gbps throughput up to 300 m (984 ft.) via multimode fiber cabling
- - LC duplex female connector supports 10GBase-SR signal at 850 nm wavelength
- - Hot-swappable interface lets you install and uninstall without shutting down
- - Supports DDM for monitoring temperature and other real-time operating parameters
Cisco-Compatible SFP-10G-SR-S SFP+ Transceiver - 10GBase-SR, DDM, Multimode LC, 850 nm, 300M (984.25 ft.)
SFP+ Transceiver Designed for Connection to Your Cisco Network Switch or Server
This SFP+ transceiver allows you to connect a 50/125 multimode fiber optic cable to a 10 Gbps network router, server or switch. It transmits data up to 300 meters (984 feet) and supports bi-directional Gigabit Ethernet communication up to 11.1 Gbps. The metal housing protects against electromagnetic interference (EMI) and excessive power dissipation.
Functionally Equivalent to Cisco SFP-10G-SR-S Transceiver Module
The MSA-compliant N286-10G-SR-S functions just like the equivalent Cisco SFP-10G-SR-S transceiver module and is manufactured to meet or exceed Cisco specifications. You can use this transceiver with any compatible Cisco router, server or switch and receive the same performance as the SFP-10G-SR-S.
Hot-Swappable for Installation Without Network Interruption
This input/output device is fully hot-swappable, so you can install it without a potentially costly 10 Gbps network shutdown or device reboot. Just plug the SFP+ end of the transceiver into your Cisco network device. The other end has an LC duplex connector to link with multimode fiber optic cable (sold separately). A convenient bail clasp latch helps you carefully remove the module from the device.
Supports Digital Diagnostic Monitoring (DDM) for Real-Time Status Monitoring
DDM support lets you keep track of various operating statuses in real time, including transceiver temperature, input and output power, and supply voltage.
S-Class Transceiver Highly Recommended for Enterprise Network
This S-Class fiber transceiver module is ideal for enterprise network runs of shorter distances than other standard modules. The S-Class N286-10G-SR-S supports only Ethernet protocol and operates only within commercial temperature ranges (0 to 70°C).
Tripp Lite N286-10G-SR-S, Fiber optic, 10000 Mbit/s, SFP+, LC, 50/125 µm, SR
Tripp Lite N286-10G-SR-S. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, PCI bus: SFP+. Product colour: Silver, Brand compatibility: Cisco. Compliance certificates: RoHS. Weight: 30 g. Package width: 114 mm, Package depth: 29,7 mm, Package height: 21,6 mm
